LNK304DN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Packaging | Cut Tape |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Power Rating | 80mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Frequency | 66kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 70V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Power Dissipation-Max | 12mW |
| Nominal Supply Current | 200μA |
| Current - Output | 170mA |
| Voltage - Output | 700V |
| Topology | Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Max Duty Cycle | 72 % |
| Max Junction Temperature (Tj) | 150°C |
| Max Supply Voltage (AC) | 265V |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK304DN Overview
This ac to dc converter is embedded in package SOIC .The AC/DC power converter is available in Cut Tape .The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.The switching frequency reaches 66kHz .Total terminations are 8 .The ac/dc converter has a total of 8 pins.In this ac-dc converter, there are 8 pins.The ac dc converters are suitable for mounting by Surface Mount .There are 1 outputs to be run.AC to DC converter reaches high efficiency when operated at a frequency of 66kHz .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .A voltage of less than 85V V can be used with the AC to DC inverter.Supply voltage across the converter must be 85V at all times.The maximum supply voltage across the converter is 265V .There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .Using the maximum 150°C ensures that the AC to DC power converter runs in a stable manner.There must be a minimum working temperature of -40°C for this isolated switch.A 170mA output current provides maximum flexibility in design.If the supply voltage is set to 70V , then it can operate.There is 700V output voltage from it.
LNK304DN Features
Packaged with SOIC
Switching Frequency at 66kHz
With 8 pins
LNK304DN Applications
There are a lot of Power Integrations LNK304DN AC DC Converters applications.
- Standby power supplies for TV
- Battery chargers for cellular phones
- Standby Power Supplies
- Adaptors for DSCs
- Power tools
- Universal input AC/DC adapters (15W - 45W)
- IoT Applications
- Appliances
- PDAs
- Utility meters
