Parameters |
Control Technique |
PULSE WIDTH MODULATION |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
72 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
69% |
Output Isolation |
Non-Isolated |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2014 |
Series |
LinkSwitch®-TN |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
80mW |
Max Power Dissipation |
12mW |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
66kHz |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
700V |
Output Type |
Adjustable |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
200μA |
Output Current |
170mA |
Topology |
Buck, Buck-Boost, Flyback |
Min Input Voltage |
85V |
Max Input Voltage |
265V |
LNK304GN Overview
This ac to dc converter is included in the package 8-SMD (7 Leads), Gull Wing .You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.In total, there are 8 terminations.It contains 8 pins.There are 8 pins in the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .It belongs to the family of LinkSwitch?-TN manufacturers.There are 1 outputs to be run.AC to DC converter is set to 170mA for the output current.There is 700V output voltage from this AC/DC converter.As long as AC to DC converter is operated at frequency 66kHz ,it is capable of attaining high efficiency.This is the standard of REACH SVHC : No SVHC .The AC to DC converter can be powered under 265V voltage.The AC to DC inverter may be operated with an input voltage less than 85V volts.Supply voltage across the converter must be 85V at all times.A maximum voltage of 265V can be applied across the converter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .It is configured to use Adjustable as an output.
LNK304GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 170mA
Output Type : Adjustable
LNK304GN Applications
There are a lot of Power Integrations LNK304GN AC DC Converters applications.
- Automotive Infotainment
- Tablets
- Chargers for cell/cordless phones
- Utility meters
- Adaptors for Portable Media Player
- Standby and Auxiliary Power Supplies
- Adapters for Handheld Electronics
- Smartphones
- Cleaners
- Set -Top Box (STB) Power Supply