LNK304PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Voltage | 9V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 200μA |
| Output Current | 170mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK304PN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.Through Hole mounts this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.As a result, the switching frequency reaches 66kHz .A total of 8 terminations have been recorded.The ac/dc converter has a total of 7 pins.There are 8 pins on the ac-dc converter.The ac dc converters is suitable for mounting by Through Hole .This AC to DC converter belongs to the LinkSwitch?-TN family of manufacturers.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is set to 170mA for the output current.There is 12V voltage output from it.SVHC for REACH can be found in the standard No SVHC .There is an option to power the AC to DC converter input voltage under 265V .It is also possible to determine REQUIRES AN AC SUPPLY OF 85 TO 256V using this ACDC converter.It is possible to use the AC to DC inverter with an input voltage less than 85V V.The minimum supply voltage across the converter is 85V .Across the converter, a maximum supply voltage of 265V may be applied.Input voltage (AC) should be below 265V .It is configured to use Adjustable as an output.
LNK304PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 170mA
Output Type : Adjustable
LNK304PN Applications
There are a lot of Power Integrations LNK304PN AC DC Converters applications.
- Battery chargers for cellular phones
- AC/DC Adaptors/Chargers for PDAs
- Power adapters for monitors
- Battery chargers for smart phones
- Power tools fast chargers with trickle and on/off
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- USB-PD 2.0
- AC/DC LED Driver applications
- WiFi Wireless
- Cellular phone chargers
