banner_page

LNK305DN

8 Terminations7 Pin AC to DC power converterLinkSwitch?-TN Series 1 Outputs66kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK305DN
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 570
  • Description: 8 Terminations7 Pin AC to DC power converterLinkSwitch?-TN Series 1 Outputs66kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2014
Series LinkSwitch®-TN
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Pure Matte Tin (Sn)
Additional Feature REQUIRES AN AC SUPPLY OF 85 TO 256V
Power Rating 80mW
Max Power Dissipation 12mW
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Outputs 1
Output Voltage 12V
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 220μA
Output Current 280mA
Topology Buck, Buck-Boost, Flyback
Min Input Voltage 85V
Frequency - Switching 66kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 72 %
Max Supply Voltage (AC) 265V
Duty Cycle 69%
Output Isolation Non-Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 1.65mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LNK305DN Overview


8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.66kHz is the switching frequency.A total of 8 terminations have been recorded.On the ac/dc converter, there are 7 pins.The pins of the ac-dc converter total to 8 .Surface Mount are the recommended mounting method for the ac dc converters.It is a member of LinkSwitch?-TN manufacturer family.There are 1 outputs to be run.We have set the output current to 280mA .Its output voltage amounts to 12V .You can read the standard of REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .As a result of using this ACDC converter, REQUIRES AN AC SUPPLY OF 85 TO 256V can also be detected.It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.In order for the converter to function properly, the supply voltage must be at least 85V .There is 265V maximum supply voltage across the converter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .

LNK305DN Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 280mA

LNK305DN Applications


There are a lot of Power Integrations LNK305DN AC DC Converters applications.

  • Replaces linear transformers
  • Set Top Boxes (STB)
  • Industrial controls
  • Standby power
  • Home appliances
  • AC?DC USB chargers for Cameras
  • AC/DC LED Driver applications
  • Universal input AC/DC adapters (15W - 45W)
  • Off--line Battery Charger
  • Standby power supplies for VCR

Write a review

Note: HTML is not translated!
    Bad           Good