LNK305GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Power Rating | 80mW |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 220μA |
| Output Current | 280mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK305GN Overview
A ac to dc converter of the package 8-SMD (7 Leads), Gull Wing contains the ac to dc converter.In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.At this point, the switching frequency reaches 66kHz .As a result, it has a total of 8 terminations.There are 7 pins on this ac/dc converter.There are 8 pins in the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .Currently, it is acdc converter of the manufacturer family of LinkSwitch?-TN .In this AC to DC transformer, there are 1 outputs to run.The output current is set to 280mA .Its output voltage is12V .REACH SVHC standard can be found at No SVHC .Input voltages under 265V can be used to power the AC to DC converter.When utilizing this ACDC converter, REQUIRES AN AC SUPPLY OF 85 TO 256V can also be discovered.A voltage of less than 85V V can be used with the AC to DC inverter.A minimum voltage of 85V is required across the converter.There is a maximum supply voltage of 265V across the converter.Input voltage (AC) should be below 265V .It is configured with a Adjustable output.
LNK305GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 66kHz
With 7 pins
Output Current at 280mA
Output Type : Adjustable
LNK305GN Applications
There are a lot of Power Integrations LNK305GN AC DC Converters applications.
- Chargers for cell/cordless phones
- DVD players
- Standby Power Supplies
- MPS parts
- AC/DC Adaptors/Chargers for Cordless Phone
- MP3
- Cleaners
- Power tools fast chargers with trickle and on/off
- AC/DC LED Driver applications
- Wireless System
