LNK305PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 220μA |
| Output Current | 280mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Drain to Source Resistance | 12Ohm |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK305PN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .There is a AC/DC converter mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.As a result, it has had 8 terminations.The ac/dc converter has 8 pins.The ac-dc converter has 8 pins.Suitable mounting is provided by Through Hole .Currently, it is acdc converter of the manufacturer family of LinkSwitch?-TN .A total of 1 outputs need to be run.AC to DC converter is set to 280mA for the output current.As a result, its output voltage is 700V .A high efficiency is achieved when operating at a frequency of 66kHz .Here is the standard for REACH SVHC : No SVHC .Input voltage for the AC to DC converter is available under 265V .The AC to DC inverter can be used with an input voltage of less than 85V V.A voltage of 85V is the minimum supply voltage across the converter.265V is the maximum supply voltage across the converter.The AC to DC power converter's input voltage (AC) should be below 265V .It uses Adjustable as an output.
LNK305PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 280mA
Output Type : Adjustable
LNK305PN Applications
There are a lot of Power Integrations LNK305PN AC DC Converters applications.
- Universal input AC/DC adapters (15W - 45W)
- DVD players
- Automotive Infotainment
- Power tools fast chargers with trickle and on/off
- Z-Wave
- Battery chargers for mobile devices with touchpad display
- ZigBee
- Home Appliance Applications
- Networking
- Battery chargers for smart phones
