LNK306DG-TL
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | LinkSwitch®-TN |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | REQUIRES AN AC SUPPLY OF 85 TO 256V |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 68μA |
| Output Current | 225mA |
| Topology | Buck, Buck-Boost, Flyback |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
LNK306DG-TL Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.It is available in Tape & Reel (TR) AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.66kHz is the switching frequency.There are a total of 8 terminations.Approximately 7 pins are present on the ac/dc converter.In this ac-dc converter, there are 8 pins.It is suitable for mounting by Surface Mount .A member of the LinkSwitch?-TN manufacturer family, it has the following characteristics.The number of outputs to run is 1 .There is 225mA output current set.Its output voltage amounts to 12V .Using this ACDC converter, it is also possible to identify REQUIRES AN AC SUPPLY OF 85 TO 256V .This converter requires a minimum supply voltage of 85V volts.265V is the maximum supply voltage across the converter.
LNK306DG-TL Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 225mA
LNK306DG-TL Applications
There are a lot of Power Integrations LNK306DG-TL AC DC Converters applications.
- Standby and Auxiliary Power Supplies
- Switching AC-DC Adapter
- Battery Chargers
- AC/DC Adaptors/Chargers for E-books
- Low-Voltage I/O System Power
- Power tools
- Battery chargers for media tablets
- USB-PD 2.0
- Universal Off-Line Power Supplies
- Power Adaptors
