LNK306GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 250μA |
| Output Current | 360mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK306GN Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .In Tube case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.In total, there are 8 terminations.On this ac/dc converter, there are 8 pins.In this ac-dc converter, there are 8 pins.There are no problem mounting the ac dc converters by Surface Mount .It belongs to the manufacturer family of LinkSwitch?-TN .A total of 1 outputs are to be processed.360mA is set as the output current.As a result, its output voltage is 700V .A high efficiency is achieved when operating at a frequency of 66kHz .You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .If the input voltage is less than 85V V, the AC to DC inverter can be used.There is a minimum supply voltage of 85V across the converter.This converter can operate at a maximum supply voltage of 265V .An input voltage (AC) should be applied under 265V to the AC to DC power converter.It is configured with a Adjustable output.
LNK306GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 360mA
Output Type : Adjustable
LNK306GN Applications
There are a lot of Power Integrations LNK306GN AC DC Converters applications.
- Auxiliary Power Supplies
- ATX/BTX Auxiliary Power
- Tablets
- Standby power
- Set-top boxes
- Replaces linear transformers
- Shaver Charger
- Digital cameras
- DVD players
- Standby power supplies for TV
