LNK306PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | LinkSwitch®-TN |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 80mW |
| Max Power Dissipation | 12mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 250μA |
| Output Current | 360mA |
| Topology | Buck, Buck-Boost, Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 72 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 69% |
| Output Isolation | Non-Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK306PN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.It is available in Tube AC/DC power converter.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.There have been 8 terminations of this program.A ac/dc converter with 8 pins is available.The pins of the ac-dc converter total to 8 .The ac dc converters are suitable for mounting by Through Hole .It is a member of LinkSwitch?-TN manufacturer family.AC to DC converter is necessary to run 1 outputs.Current output is set to 360mA .In this AC to DC transformer, the output voltage is 700V .High efficiency can be achieved when AC to DC converters frequency is set to 66kHz .It is possible to read the REACH SVHC standard at: No SVHC .Input voltages under 265V can be used to power the AC to DC converter.It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.A minimum voltage supply across the converter is 85V .There is 265V maximum supply voltage across the converter.The AC to DC power converter's input voltage (AC) should be below 265V .The output it is configured with uses Adjustable .
LNK306PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 360mA
Output Type : Adjustable
LNK306PN Applications
There are a lot of Power Integrations LNK306PN AC DC Converters applications.
- AC/DC Adaptors/Chargers for Cordless Phone
- Smartphones
- MPS parts
- Replaces linear transformers
- Home Appliance Applications
- Open Frame Switching Power Supply
- Set -Top Box (STB) Power Supply
- Shaver Charger
- Automotive Clusters
- AC/DC LED Driver applications
