Parameters |
JESD-30 Code |
R-PDIP-T7 |
Output Voltage |
5.8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Nominal Supply Current |
280μA |
Topology |
Flyback |
Output Current-Max |
0.4A |
Frequency - Switching |
200kHz |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
63 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2004 |
Series |
LinkSwitch®-HF |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Last Time Buy |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power (Watts) |
4W |
Additional Feature |
REQUIRES AN AC SUPPLY OF 85 TO 265V |
HTS Code |
8542.39.00.01 |
Max Power Dissipation |
4W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
LNK353PN Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.It is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 200kHz , the process is complete.There have been 7 terminations of this program.There are 8 pins in the ac-dc converter.It belongs to the manufacturer family of LinkSwitch?-HF .The voltage output by this AC/DC converter is 5.8V .Ac to dc inverters can be powered by up to 0.4A current.In addition to REQUIRES AN AC SUPPLY OF 85 TO 265V , this ACDC converter can also be used to determine REQUIRES AN AC SUPPLY OF 85 TO 265V .There should be no less than 85V voltage across the converter.265V is the maximum supply voltage across the converter.
LNK353PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 200kHz
LNK353PN Applications
There are a lot of Power Integrations LNK353PN AC DC Converters applications.
- AC-DC Output Power Conversion Applications
- Shaver Charger
- Remotely-controlled appliances
- Standby power supplies for VCR
- AC/DC Adaptors/Chargers for PDAs
- Standby Power for General Off-Line Applications
- Appliance Power Supplies
- Home appliances
- AC/DC Adaptors/Chargers for Cordless Phone
- DVD players