LNK354GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | LinkSwitch®-HF |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 5W |
| Max Power Dissipation | 5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 280μA |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 200kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 63 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK354GN Overview
An embedded ac to dc converter is included in 8-SMD (7 Leads), Gull Wing package.Tube case is available for the ac dc converter.In this case, the AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.At this point, the switching frequency reaches 200kHz .There are a total of 7 terminations in it.There are 8 pins on the ac/dc converter.There are 8 pins on the ac-dc converter.A member of the LinkSwitch?-HF manufacturer family, it has the following characteristics.In this AC to DC transformer, the output voltage is 5.8V .Currently, the maximum current that the ac to dc inverter can take is 0.4A .A minimum voltage supply across the converter is 85V .The maximum supply voltage across the converter is 265V .
LNK354GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 200kHz
With 8 pins
LNK354GN Applications
There are a lot of Power Integrations LNK354GN AC DC Converters applications.
- Switching AC-DC Adapter
- AC-DC Output Power Conversion Applications
- Automotive Clusters
- MPS parts
- Remotely-controlled appliances
- Home appliances
- Automotive Infotainment
- AC/DC Adaptors/Chargers for Cell Phones
- Standby and Auxiliary Power Supplies
- Laptops
