banner_page

LNK362GN

7 Terminations8 Pin AC to DC power converterLinkSwitch?-XT Series 1 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK362GN
  • Package: 8-SMD (7 Leads), Gull Wing
  • Datasheet: PDF
  • Stock: 263
  • Description: 7 Terminations8 Pin AC to DC power converterLinkSwitch?-XT Series 1 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SMD (7 Leads), Gull Wing
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series LinkSwitch®-XT
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 4 (72 Hours)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish PURE MATTE TIN
Power Rating 2.8W
Max Power Dissipation 2.8W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 250
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 132kHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G7
Number of Outputs 1
Output Voltage 5.8V
Output Type Adjustable
Analog IC - Other Type SWITCHING REGULATOR
Operating Supply Current 250μA
Output Current 375mA
Topology Flyback
Min Input Voltage 85V
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 60 %
Max Supply Voltage (AC) 265V
Duty Cycle 60%
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LNK362GN Overview


In the package 8-SMD (7 Leads), Gull Wing , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Total terminations are 7 .In this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .It is a member of LinkSwitch?-XT manufacturer family.The number of outputs to run is 1 .Currently, the output current is set to 375mA .Its output voltage amounts to 5.8V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 132kHz .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter input voltage can be powered under 265V .Input voltages less than 85V volts can be used to operate the AC to DC inverter.In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum voltage supply across the converter of 265V volts.The AC to DC power converter's input voltage (AC) should be below 265V .It is configured with Adjustable as the output.

LNK362GN Features


Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 375mA
Output Type : Adjustable

LNK362GN Applications


There are a lot of Power Integrations LNK362GN AC DC Converters applications.

  • LED Driver
  • Humidifier
  • Handheld/Battery-Powered Systems
  • RCC SMPS
  • Adapter/Charger for Cordless Phones
  • Battery chargers for cellular phones
  • Battery Chargers
  • MPS parts
  • Standby power supplies for IR
  • Power tools

Write a review

Note: HTML is not translated!
    Bad           Good