banner_page

LNK362PG

7 Pin AC to DC power converterLinkSwitch?-XT Series 1 Outputs132kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK362PG
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 220
  • Description: 7 Pin AC to DC power converterLinkSwitch?-XT Series 1 Outputs132kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2008
Series LinkSwitch®-XT
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Power (Watts) 2.8W
Max Power Dissipation 2.8W
Number of Outputs 1
Output Voltage 6V
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 300μA
Output Current 330mA
Output Power 2.6W
Topology Flyback
Frequency - Switching 132kHz
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 60 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Supply Voltage (AC) 85V
Radiation Hardening No
RoHS Status RoHS Compliant

LNK362PG Overview


This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.A AC/DC converter of this type is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.In this AC to DC transformer, the switching frequency is 132kHz .A ac/dc converter with 7 pins is available.It are possible to mount thare ac dc converters by Through Hole .A member of the LinkSwitch?-XT manufacturer family, it has the following characteristics.A total of 1 outputs need to be run.Currently, the output current is set to 330mA .Its output voltage is6V .Coverters generate 2.6W in terms of output power.A minimum voltage of 85V is required across the converter.This converter can operate at a maximum supply voltage of 265V .

LNK362PG Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Current at 330mA

LNK362PG Applications


There are a lot of Power Integrations LNK362PG AC DC Converters applications.

  • Standby Power Supplies
  • Humidifier
  • White goods
  • RCC SMPS
  • Linear Adapter Replacements
  • Standby and Auxiliary Power Supplies
  • Battery chargers for mobile devices with touchpad display
  • Portable audio
  • Standby power supplies for TV
  • Low power ac?dc Adapters for Chargers

Write a review

Note: HTML is not translated!
    Bad           Good