LNK363GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | LinkSwitch®-XT |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Power Rating | 7.5W |
| Max Power Dissipation | 7.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 132kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 250μA |
| Output Current | 750mA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 60 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 60% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK363GN Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .There is a AC/DC power converter of Tube available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.In total, it has 7 terminations.It contains 8 pins.The pins of the ac-dc converter total to 8 .There are no problem mounting the ac dc converters by Surface Mount .A member of the LinkSwitch?-XT manufacturer family, it has the following characteristics.In this AC to DC transformer, there are 1 outputs to run.AC to DC converter is set to 750mA for the output current.There is 5.8V voltage output from it.A high efficiency is achieved when operating at a frequency of 132kHz .You can read the standard for REACH SVHC at: No SVHC .The AC to DC converter input voltage can be powered under 265V .The AC to DC inverter may be operated with an input voltage less than 85V volts.A voltage of 85V is the minimum supply voltage across the converter.There is a maximum voltage supply across the converter of 265V volts.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .It is configured to use Adjustable as an output.
LNK363GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
With 8 pins
Output Current at 750mA
Output Type : Adjustable
LNK363GN Applications
There are a lot of Power Integrations LNK363GN AC DC Converters applications.
- Adapters
- Adapters for Handheld Electronics
- Laptops and personal digital assistants
- AC?DC USB chargers for Cameras
- Portable audio
- Adapter for ADSL
- AC/DC Adaptors/Chargers for Cell Phones
- White goods
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- USB-PD 2.0
