LNK364DN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | LinkSwitch®-XT |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Power Rating | 9W |
| Max Power Dissipation | 9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 265 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 200μA |
| Output Current | 268mA |
| Output Power | 6W |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 60 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK364DN Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.When the switching frequency reaches 132kHz , the circuit is closed.As a result, it has a total of 7 terminations.The ac/dc converter has 7 pins.There are 8/7 pins on the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.It belongs to the manufacturer family of LinkSwitch?-XT .A total of 1 outputs need to be run.We have set the output current to 268mA .Its output voltage is5.8V .In the AC to DC transformer of a coverter, the output power is 6W .There should be no less than 85V voltage across the converter.Across the converter, the maximum supply voltage is 265V .
LNK364DN Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Current at 268mA
LNK364DN Applications
There are a lot of Power Integrations LNK364DN AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Laptops and personal digital assistants
- MP3
- Adapters
- Z-Wave
- Wireless System
- Laptops
- AC?DC USB chargers for Cameras
- Rice Cooker
- Standby power
