LNK364PN
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Voltage | 85V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 250μA |
| Output Current | 750mA |
| Topology | Flyback |
| Frequency - Switching | 132kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 60 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2007 |
| Series | LinkSwitch®-XT |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | PURE MATTE TIN |
| Power Rating | 9W |
| Max Power Dissipation | 9W |
LNK364PN Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The ac dc converter is available in Tube case.Through Hole mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.In this AC to DC transformer, the switching frequency is 132kHz .As a result, it has had 7 terminations.A ac/dc converter with 7 pins is available.There are 8 pins in total.There are no problem mounting the ac dc converters by Through Hole .It is a member of LinkSwitch?-XT manufacturer family.A total of 1 outputs need to be run.AC to DC converter is set to 750mA for the output current.As a result, its output voltage is 5.8V .In order for the converter to function properly, the supply voltage must be at least 85V .265V is the maximum supply voltage across the converter.This output uses Adjustable .
LNK364PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 132kHz
With 7 pins
Output Current at 750mA
Output Type : Adjustable
LNK364PN Applications
There are a lot of Power Integrations LNK364PN AC DC Converters applications.
- Power Adaptors
- Automotive Telematics
- AC/DC Adaptors/Chargers for Cordless Phone
- Air conditioners
- Set-top boxes
- WiFi Wireless
- MP3
- Networking
- White goods
- MPS parts
