LNK410EG
| Parameters | |
|---|---|
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current per Channel | 4.9A |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Dimming | Triac |
| Switching Frequency | 66kHz |
| Voltage - Supply (Min) | 36V |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 7-SSIP, 6 Leads, Exposed Pad, Formed Leads |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 1999 |
| Series | LinkSwitch®-PH |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | AC DC Offline Switcher |
| Terminal Finish | MATTE TIN |
| Applications | Lighting |
| Frequency | 66kHz |
| Number of Outputs | 1 |
| Max Output Current | 9A |
| Max Supply Voltage | 725V |
| Max Output Voltage | 725V |
LNK410EG Overview
It saves board space with the 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package. A LED driver using this design has 1 outputs.In order to mount the led light driver, Through Hole is used.AC DC Offline Switcher emerges with high efficiency and reliability.LED drivers capable of operating at -40°C~150°C TJ can be used.Lighting has considerable advantages.Based on the frequency of 66kHz, it operates.Its configuration is based on 6 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 36V.It's mounted in Through Hole.There is no maximum value acceptable for the supply voltage, so 725V is acceptable.It operates at a voltage of 85V as its minimal input voltage.It's possible for this electronic component to fully function when the switching frequency is maintained at 66kHz.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 9A.This LED driver belonging to the LinkSwitch?-PH series is a key component for a broad range of applications.If the output voltage exceeds 725V, it should be corrected.A voltage of -300mV is maintained as the minimal voltage it outputs.
LNK410EG Features
Available in the 7-SSIP, 6 Leads, Exposed Pad, Formed Leads package
Operating temperature of -40°C~150°C TJ
Frequency of 66kHz
Switching frequency of 66kHz
LNK410EG Applications
There are a lot of Power Integrations LNK410EG LED Driver ICs applications.
- White LED Backlight for portable equipment
- Linear fluorescent
- Other Electronic Devices
- Constant Voltage Power Source for portable equipment
- Flicker-free LED Lighting using R1580N
- Amusement Machines
- Panel lighting
- General lighting
- Sports Facility Lighting
- Architectural lighting
