LNK500GN
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 5.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.6V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK500GN Overview
The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.The AC/DC power converter Tube is available for this product.A AC/DC converter of this type is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.Switching frequency reaches 30kHz~42kHz Hz.There are a total of 7 terminations.The ac/dc converter has a total of 8 pins.There are 8 pins in total.The product is acdc converter of the LinkSwitch? manufacturer family.This AC/DC converter produces a voltage of 5.6V as its output.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 6V .Ac to dc inverters can be powered by up to 0.4A current.There is a minimum supply voltage of 85V across the converter.There is a maximum voltage supply across the converter of 265V volts.
LNK500GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 30kHz~42kHz
With 8 pins
LNK500GN Applications
There are a lot of Power Integrations LNK500GN AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- AC?DC USB chargers for Cameras
- Standby Power for General Off-Line Applications
- Battery chargers for smart phones
- Low power ac?dc Adapters for Chargers
- Power Adaptors
- Standby Power Supplies
- Universal input AC/DC adapters (15W - 45W)
- Industrial controls
- Small off-line low voltage power supplies
