LNK500PN
| Parameters | |
|---|---|
| Output Voltage | 700V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Output Current | 400mA |
| Output Power | 3W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 30kHz~42kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 5.5W |
| Power Rating | 5.5W |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 42kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
LNK500PN Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.At this point, the switching frequency reaches 30kHz~42kHz .In total, there are 7 terminations.In this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .A member of the LinkSwitch? manufacturer family, it has the following characteristics.There are 1 outputs to be processed.Currently, the output current is set to 400mA .Its output voltage is700V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 42kHz .This is the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 265V .It is assumed that a coverter generates 3W as its output power.The AC to DC inverter may be operated with an input voltage less than 85V volts.There is a minimum supply voltage of 85V across the converter.This converter can operate at a maximum supply voltage of 265V .
LNK500PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 30kHz~42kHz
With 8 pins
Output Current at 400mA
LNK500PN Applications
There are a lot of Power Integrations LNK500PN AC DC Converters applications.
- Automotive Infotainment
- Battery chargers for cordless
- 3.3V power supplies
- Standby power supplies for VCR
- Home Appliance Applications
- Standby power
- Standby power supplies for TV
- AC?DC USB chargers for Cameras
- Automotive Clusters
- Humidifier
