LNK501GN
| Parameters | |
|---|---|
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 5.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5.6V |
| Output Type | Adjustable |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.655mm |
| Width | 6.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
LNK501GN Overview
This ac to dc converter is included in the package 8-SMD (7 Leads), Gull Wing .The ac dc converter is available in Tube case.Surface Mount is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 30kHz~42kHz , the process is complete.As a result, it has a total of 7 terminations.A total of 8 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .It belongs to the family of LinkSwitch? manufacturers.A total of 1 outputs need to be run.The voltage output by this AC/DC converter is 5.6V .The input voltage with the maximal value of 6V can be ensured on the basis of unique technique.An amount of current of 0.4A can be supplied to the ac to dc inverter.A minimum voltage of 85V is required across the converter.This converter can operate at a maximum supply voltage of 265V .It is configured with Adjustable as the output.
LNK501GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 30kHz~42kHz
Output Type : Adjustable
LNK501GN Applications
There are a lot of Power Integrations LNK501GN AC DC Converters applications.
- White goods
- Battery Chargers
- Battery chargers for media tablets
- Power Adaptors
- Set Top Boxes (STB)
- Battery chargers for cellular phones
- Low power ac?dc Adapters for Chargers
- Standby power supplies for IR
- Air Conditioning
- Switching AC-DC Adapter
