LNK501PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2004 |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 5.5W |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 4W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Output Voltage | 5.6V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 1.06mA |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Output Current-Max | 0.4A |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.655mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK501PN Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.Through Hole mounts this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.In this AC to DC transformer, the switching frequency is 30kHz~42kHz .In total, there are 7 terminations.There are 8 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Through Hole .It belongs to the manufacturer family of LinkSwitch? .It produces a voltage of 5.6V .Unique techniques can be used to ensure input voltage at the maximum value of 6V .In theory, the maximum current that can be supplied to the ac to dc inverter is 0.4A .A voltage of 85V is the minimum supply voltage across the converter.There is a maximum voltage supply across the converter of 265V volts.
LNK501PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 30kHz~42kHz
LNK501PN Applications
There are a lot of Power Integrations LNK501PN AC DC Converters applications.
- Utility meters
- AC--DC Adapter
- ATX/BTX Auxiliary Power
- AC/DC LED Driver applications
- Standby Power Supply
- LED Driver
- Battery Chargers
- Cellular phone chargers
- Wall switches
- Set -Top Box (STB) Power Supply
