LNK520GN-TL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | LinkSwitch® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 3.5W |
| Max Power Dissipation | 5.5W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Output Voltage | 5.6V |
| Input Voltage-Nom | 5.75V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 750μA |
| Input Voltage (Min) | 5.5V |
| Topology | Flyback |
| Frequency - Switching | 30kHz~42kHz |
| Input Voltage (Max) | 6V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 80 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK520GN-TL Overview
This ac to dc converter is embedded in package 8-SMD (7 Leads), Gull Wing .In Tape & Reel (TR) case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.As soon as the switching frequency reaches 30kHz~42kHz , the circuit is closed.There are a total of 8 terminations in it.There are 8 pins on the ac/dc converter.There are 8 pins on the ac-dc converter.It belongs to the manufacturer family of LinkSwitch? .The voltage output by this AC/DC converter is 5.6V .It is possible to ensure a maximum value of 6V for the input voltage using a unique technique.Supply voltage across the converter must be 85V at all times.Across the converter, the maximum supply voltage is 265V .
LNK520GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 30kHz~42kHz
With 8 pins
LNK520GN-TL Applications
There are a lot of Power Integrations LNK520GN-TL AC DC Converters applications.
- Air conditioners
- Standby Power Supplies
- ZigBee
- Set-top boxes
- AC?DC USB chargers for Tablets
- DVD players
- Tablets
- Automotive Telematics
- Cleaners
- AC-DC Output Power Conversion Applications
