LNK562DN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Weight | 506.605978mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 1.9W |
| Max Power Dissipation | 1.9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 160μA |
| Output Current | 148mA |
| Output Power | 1.9W |
| Topology | Flyback |
| Frequency - Switching | 66kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK562DN Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube case, the ac dc converter is available.There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.The switching frequency reaches 66kHz .As a result, it has had 7 terminations.On this ac/dc converter, there are 7 pins.There are a total of 8/7 pins on the ac-dc converter.The ac dc converters are suitable to mount by Surface Mount .The AC to DC converter belongs to the manufacturer family of LinkSwitch?-LP .There are 1 outputs to be run.Current output is set to 148mA .It produces a voltage of 5.8V .The output power of a coverter generates 1.9W .The minimum supply voltage across the converter is 85V .The maximum supply voltage across the converter is 265V .
LNK562DN Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 66kHz
With 7 pins
Output Current at 148mA
LNK562DN Applications
There are a lot of Power Integrations LNK562DN AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Battery chargers for cordless
- Consumer electronics
- Power adapters for network devices
- Digital cameras
- Z-Wave
- Auxiliary Power Supply
- AC?DC USB chargers for Cell Phones
- Laptops
- Adapter for ADSL
