Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Number of Pins |
7 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
LinkSwitch®-LP |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
7 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
1.9W |
Max Power Dissipation |
1.9W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
5.8V |
Output Type |
Adjustable |
Analog IC - Other Type |
SWITCHING REGULATOR |
Operating Supply Current |
220μA |
Output Current |
148mA |
Output Power |
1.9W |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
66kHz |
Max Input Voltage |
265V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
70 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
3.68mm |
Length |
9.83mm |
Width |
6.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
LNK562GN Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .You can get it in AC/DC power converter Tube .Surface Mount mounts this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.The switching frequency reaches 66kHz .A total of 7 terminations have been recorded.On this ac/dc converter, there are 7 pins.Up to 8 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .It belongs to a manufacturer family of LinkSwitch?-LP .There are 1 outputs to be run.Current output is set to 148mA .Its output voltage amounts to 5.8V .Here is the standard for REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 265V .Coverters generate 1.9W as their output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.A minimum voltage of 85V is required across the converter.Across the converter, a maximum supply voltage of 265V may be applied.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .It is configured to use Adjustable as an output.
LNK562GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 66kHz
With 7 pins
Output Current at 148mA
Output Type : Adjustable
LNK562GN Applications
There are a lot of Power Integrations LNK562GN AC DC Converters applications.
- Battery chargers for media tablets
- AC?DC USB chargers for Cameras
- MP3
- USB-PD 2.0
- Low-Voltage I/O System Power
- IoT Applications
- Remotely-controlled appliances
- Battery chargers for cellular phones
- Battery chargers for mobile devices with touchpad display
- Power adapters for network devices