LNK562PG
| Parameters | |
|---|---|
| Power Rating | 1.9W |
| Max Power Dissipation | 1.9W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 66kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
LNK562PG Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The AC/DC power converter Tube is available for this product.Through Hole is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.As a result, the switching frequency reaches 66kHz .As a result, it has a total of 7 terminations.The ac/dc converter has a total of 7 pins.A total of 8 pins are present on the ac-dc converter.It belongs to the family of LinkSwitch?-LP manufacturers.Ac to dc inverters can only be powered at a maximum current of 0.2A .In the following link, you will find the REACH SVHC standard: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.Input voltages less than 85V volts can be used to operate the AC to DC inverter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
LNK562PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 66kHz
With 7 pins
LNK562PG Applications
There are a lot of Power Integrations LNK562PG AC DC Converters applications.
- Auxiliary Power Supply
- Standby Power Supplies
- WiFi Wireless
- Home Appliance Applications
- Standby Power Supplies
- ATX/BTX Auxiliary Power
- Air Conditioning
- Appliance Power Supplies
- Rice Cooker
- Networking
