banner_page

LNK562PN

7 Terminations8 Pin AC to DC power converterLinkSwitch?-LP Series 1 OutputsMin 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK562PN
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 295
  • Description: 7 Terminations8 Pin AC to DC power converterLinkSwitch?-LP Series 1 OutputsMin 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series LinkSwitch®-LP
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
Power Rating 1.9W
Max Power Dissipation 1.9W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 66kHz
Pin Count 8
JESD-30 Code R-PDIP-T7
Number of Outputs 1
Output Voltage 700V
Output Type Adjustable
Analog IC - Other Type SWITCHING REGULATOR
Nominal Supply Current 220μA
Output Current 375mA
Output Power 1.9W
Topology Flyback
Min Input Voltage 85V
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 70 %
Max Supply Voltage (AC) 265V
Duty Cycle 70%
Output Isolation Isolated
Min Supply Voltage (AC) 85V
Height 3.68mm
Length 9.83mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LNK562PN Overview


An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .A total of 7 terminations have been recorded.It contains 8 pins.Up to 8 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .It is a member of LinkSwitch?-LP manufacturer family.Running 1 outputs is available.Current output is set to 375mA .In this AC to DC transformer, the output voltage is 700V .A high efficiency is achieved when operating at a frequency of 66kHz .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter can be powered under 265V voltage.The output power of a coverter is assumed to be 1.9W .The AC to DC inverter may be operated with an input voltage less than 85V volts.A minimum voltage supply across the converter is 85V .There is a maximum supply voltage of 265V across the converter.It uses Adjustable as an output.

LNK562PN Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 375mA
Output Type : Adjustable

LNK562PN Applications


There are a lot of Power Integrations LNK562PN AC DC Converters applications.

  • WiFi Wireless
  • Standby Power Supplies
  • Air conditioners
  • Standby Power for General Off-Line Applications
  • Standby Power Supplies
  • Switching AC-DC Adapter
  • Standby power
  • Set -Top Box (STB) Power Supply
  • AC/DC Adaptors/Chargers for Cordless Phone
  • Standby power supplies for TV

Write a review

Note: HTML is not translated!
    Bad           Good