LNK563DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8/7 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 83kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK563DG Overview
In the 8-SOIC (0.154, 3.90mm Width), 7 Leads package, the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 83kHz .In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.In this ac-dc converter, there are 8/7 pins.This AC to DC converter belongs to the LinkSwitch?-LP family of manufacturers.An amount of current of 0.2A can be supplied to the ac to dc inverter.In the following link, you will find the REACH SVHC standard: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.A voltage of less than 85V V can be used with the AC to DC inverter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
LNK563DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 83kHz
With 7 pins
LNK563DG Applications
There are a lot of Power Integrations LNK563DG AC DC Converters applications.
- Home appliances
- Universal input AC/DC adapters (15W - 45W)
- USB type-c v1.2 chargers with optional VDM
- Smartphones
- Set -Top Box (STB) Power Supply
- Shaver Charger
- Adapters
- LED Driver
- Humidifier
- AC-DC Output Power Conversion Applications
