LNK563GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Output Current | 148mA |
| Output Power | 2.5W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 83kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK563GN Overview
The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.In Tube case, the ac dc converter is available.Surface Mount is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.When the switching frequency reaches 83kHz , the circuit is closed.Total terminations are 7 .The ac/dc converter has a total of 7 pins.A total of 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .A member of the LinkSwitch?-LP manufacturer family, it has the following characteristics.There are 1 outputs to be run.The output current is set to 148mA .In this AC to DC transformer, the output voltage is 5.8V .SVHC for REACH can be found in the standard No SVHC .Input voltages under 265V can be used to power the AC to DC converter.The output power of a coverter is assumed to be 2.5W .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.In order for the converter to function properly, the supply voltage must be at least 85V .Across the converter, a maximum supply voltage of 265V may be applied.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .It uses Adjustable as an output.
LNK563GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 83kHz
With 7 pins
Output Current at 148mA
Output Type : Adjustable
LNK563GN Applications
There are a lot of Power Integrations LNK563GN AC DC Converters applications.
- Lighting controls
- Set Top Boxes (STB)
- Standby power supplies for VCR
- WiFi Wireless
- Automotive Clusters
- Cellular phone chargers
- Automotive Telematics
- Utility meters
- Adapter/Charger for Cell
- USB type-c v1.2 chargers with optional VDM
