banner_page

LNK563PG

7 Terminations7 Pin AC to DC power converterLinkSwitch?-LP Series 83kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK563PG
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 966
  • Description: 7 Terminations7 Pin AC to DC power converterLinkSwitch?-LP Series 83kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2008
Series LinkSwitch®-LP
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Matte Tin (Sn)
HTS Code 8542.39.00.01
Power Rating 2.5W
Max Power Dissipation 2.5W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Pin Count 8
Analog IC - Other Type SWITCHING REGULATOR
Topology Flyback
Min Input Voltage 85V
Output Current-Max 0.2A
Frequency - Switching 83kHz
Max Input Voltage 265V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Duty Cycle 70%
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LNK563PG Overview


This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.As a result, the switching frequency reaches 83kHz .There have been 7 terminations of this program.The ac/dc converter has a total of 7 pins.Up to 8 pins are present on the ac-dc converter.It is a member of LinkSwitch?-LP manufacturer family.Ac to dc inverters can be powered by up to 0.2A current.You can read the standard of REACH SVHC : No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.An input voltage of less than 85V volts can be used with the AC to DC inverter.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.

LNK563PG Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 83kHz
With 7 pins

LNK563PG Applications


There are a lot of Power Integrations LNK563PG AC DC Converters applications.

  • Power Adaptors
  • Replaces linear transformers
  • Standby and Auxiliary Power Supplies
  • Universal Off-Line Power Supplies
  • White goods
  • Power adapters for monitors
  • LED lights
  • Handheld/Battery-Powered Systems
  • Battery chargers for cordless
  • Appliance Power Supplies

Write a review

Note: HTML is not translated!
    Bad           Good