LNK564DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Max Supply Voltage | 650V |
| Min Supply Voltage | 90V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Power | 3W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK564DG Overview
It is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The AC/DC power converter Tube is available for this product.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .As soon as the switching frequency reaches 100kHz , the circuit is closed.It has a total of 7 terminations.On the ac/dc converter, there are 7 pins.In this ac-dc converter, there are 8/7 pins.It belongs to the family of LinkSwitch?-LP manufacturers.A total of 1 outputs are available for processing.The maximum current that can be supplied to the ac to dc inverter is 0.2A .REACH SVHC standard can be found at No SVHC .There is an option to power the AC to DC converter input voltage under 265V .It is assumed that a coverter generates 3W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.The AC to DC power converter's input voltage (AC) should be below 265V .The AC to DC power supply is capable of operating with a minimum supply voltage of 90V volts.
LNK564DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 7 pins
LNK564DG Applications
There are a lot of Power Integrations LNK564DG AC DC Converters applications.
- Standby power supplies for IR
- Adapters for Handheld Electronics
- Switching AC-DC Adapter
- Battery Chargers
- Tablets
- Charger
- Laptops
- Standby Power Supplies
- Battery chargers for smart phones
- Appliances
