LNK564GN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK564GN Overview
This ac to dc converter is embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter Tube is available for this product.There is a mounting point for this AC/DC converter in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.This AC DC converter employs SWITCHING REGULATOR analog IC type.There is 100kHz switching frequency.As a result, it has had 7 terminations.There are 7 pins on the ac/dc converter.Up to 8 pins are present on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.It is a member of LinkSwitch?-LP manufacturer family.A total of 1 outputs are to be processed.There is 5.8V output voltage from this AC/DC converter.Ac to dc inverters can be powered by up to 0.2A current.Here is the standard for REACH SVHC : No SVHC .An input voltage of 265V is available for powering the AC to DC converter.The AC to DC inverter can be used with an input voltage of less than 85V V.There is a minimum supply voltage of 85V across the converter.Across the converter, the maximum supply voltage is 265V .A AC to DC power converter's input voltage (AC) should not exceed 265V .It is configured to output Adjustable .
LNK564GN Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 100kHz
With 7 pins
Output Type : Adjustable
LNK564GN Applications
There are a lot of Power Integrations LNK564GN AC DC Converters applications.
- Battery Chargers
- Battery chargers for smart phones
- Standby power supplies for IR
- Chargers for cell/cordless phones
- AC/DC LED Driver applications
- Portable Apparatus
- Power tools
- Standby power supplies for TV
- Networking
- Open Frame Switching Power Supply
