LNK564PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Output Current-Max | 0.2A |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK564PG Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.It is available in Tube AC/DC power converter.There is a AC/DC converter mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.At this point, the switching frequency reaches 100kHz .In total, it has 7 terminations.It contains 7 pins.Up to 8 pins are present on the ac-dc converter.Currently, it is acdc converter of the manufacturer family of LinkSwitch?-LP .Ac to dc inverters can only be powered at a maximum current of 0.2A .SVHC for REACH can be found in the standard No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.Input voltage (AC) should be below 265V .
LNK564PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
LNK564PG Applications
There are a lot of Power Integrations LNK564PG AC DC Converters applications.
- Wall switches
- Power Adaptors
- Standby Power Supply
- MPS parts
- Lighting controls
- Power tools
- Adapters
- 3.3V power supplies
- Battery chargers for smart phones
- Chargers for cell/cordless phones
