LNK564PN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 2.26799g |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5.8V |
| Output Type | Adjustable |
| Max Output Current | 375mA |
| Min Supply Voltage | 50V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 220μA |
| Output Current | 148mA |
| Output Power | 3W |
| Topology | Flyback |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK564PN Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter Tube is available for this product.It is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.A total of 7 terminations have been recorded.Approximately 7 pins are present on the ac/dc converter.The ac-dc converter has 8 pins.The ac dc converters are suitable for mounting by Through Hole .It belongs to a manufacturer family of LinkSwitch?-LP .A total of 1 outputs are available for processing.We have set the output current to 148mA .It produces a voltage of 5.8V .High efficiency can be achieved when AC to DC converters frequency is set to 100kHz .REACH SVHC standard can be found at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .In the AC to DC transformer of a coverter, the output power is 3W .A minimum voltage supply across the converter is 85V .There is a maximum supply voltage of 265V across the converter.The AC to DC power supply can operate with a minimum supply voltage of 50V volts.There is a Adjustable output configured.
LNK564PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 148mA
Output Type : Adjustable
LNK564PN Applications
There are a lot of Power Integrations LNK564PN AC DC Converters applications.
- Records
- Consumer electronics
- AC?DC USB chargers for Cell Phones
- AC/DC LED Driver applications
- Linear Adapter Replacements
- Switching AC-DC Charger
- Air conditioners
- Power adapters for network devices
- AC/DC Adaptors/Chargers for Cell Phones
- AC/DC Adaptors/Chargers for PDAs
