banner_page

LNK574DG

8 Terminations8 Pin AC to DC power converterLinkZero?-LP Series 1 Outputs100kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK574DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 423
  • Description: 8 Terminations8 Pin AC to DC power converterLinkZero?-LP Series 1 Outputs100kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Surface Mount YES
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2012
Series LinkZero™-LP
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish MATTE TIN
Power Rating 3W
Max Power Dissipation 3W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
Number of Outputs 1
Min Supply Voltage 50V
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 250μA
Output Current 375mA
Output Power 3W
Topology Flyback
Min Input Voltage 85V
Frequency - Switching 100kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 63 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V

LNK574DG Overview


There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube case, the ac dc converter is available.It is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.There are a total of 8 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.This AC to DC converter belongs to the LinkZero?-LP manufacturer family.There are 1 outputs to be processed.AC to DC converter is set to 375mA for the output current.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .There is 3W output power generated by a coverter.A voltage of less than 85V V can be used with the AC to DC inverter.The minimum supply voltage across the converter is 85V .There is 265V maximum supply voltage across the converter.AC to DC power converters should be able to accept input voltages (AC) below 265V .It is capable of working with a minimum supply voltage of 50V volts.

LNK574DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 8 pins
Output Current at 375mA

LNK574DG Applications


There are a lot of Power Integrations LNK574DG AC DC Converters applications.

  • Set-top boxes
  • Set Top Boxes (STB)
  • Standby power supplies for TV
  • Adapters
  • Low power ac?dc Adapters for Chargers
  • Appliances
  • Dimmers
  • ZigBee
  • RCC SMPS
  • Standby and Auxiliary Power Supplies

Write a review

Note: HTML is not translated!
    Bad           Good