LNK584GG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkZero™-AX |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Max Supply Voltage | 265V |
| Min Supply Voltage | 85V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 260μA |
| Output Current | 300mA |
| Output Power | 3W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 63 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Either |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK584GG Overview
The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.You can get it in AC/DC power converter Tube .A AC/DC converter of this type is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.100kHz is the switching frequency.Total terminations are 7 .In this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 7 .This AC to DC converter belongs to the LinkZero?-AX manufacturer family.A total of 1 outputs are to be processed.There is 300mA output current set.Its output voltage is5V .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter can be powered from the input voltage under 265V .A coverter produces 3W watts of output power.A voltage of less than 85V V can be used with the AC to DC inverter.There is a minimum supply voltage of 85V across the converter.There is a maximum voltage supply across the converter of 265V volts.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .It is capable of working with a minimum supply voltage of 85V volts.
LNK584GG Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 100kHz
With 8 pins
Output Current at 300mA
LNK584GG Applications
There are a lot of Power Integrations LNK584GG AC DC Converters applications.
- Battery chargers for cordless
- Switching AC-DC Adapter
- Home appliances
- LED lights
- Tablets
- Networking
- Power Adaptors
- AC?DC USB chargers for Cell Phones
- Automotive Telematics
- Wall switches
