Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width), 7 Leads |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2002 |
Series |
LinkSwitch®-II |
JESD-609 Code |
e3 |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Terminal Finish |
MATTE TIN |
Power Rating |
3.3W |
Max Power Dissipation |
3.3W |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Frequency |
66kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
700V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Nominal Supply Current |
320mA |
Power Dissipation |
2.5W |
Output Current |
480mA |
Output Power |
3.3W |
Topology |
Flyback |
Min Input Voltage |
85V |
Frequency - Switching |
Up to 85kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
55 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Height |
1.65mm |
Length |
4.9mm |
Width |
3.9mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK603DG Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.When the switching frequency reaches Up to 85kHz , the process is complete.As a result, it has had 8 terminations.Approximately 8 pins are present on the ac/dc converter.The ac-dc converter has 8 pins.There are no problem mounting the ac dc converters by Surface Mount .Currently, it is acdc converter of the manufacturer family of LinkSwitch?-II .Running 1 outputs is available.We are setting the output current to 480mA .This AC/DC converter produces a voltage of 700V as its output.This power AC DC is capable of reaching high efficiencies when operating at a frequency of 66kHz .It is possible to read the REACH SVHC standard at: No SVHC .An input voltage of 265V is available for powering the AC to DC converter.The output power of a coverter is assumed to be 3.3W .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.A minimum voltage supply across the converter is 85V .Across the converter, a maximum supply voltage of 265V may be applied.A AC to DC power converter's input voltage (AC) should not exceed 265V .
LNK603DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 480mA
LNK603DG Applications
There are a lot of Power Integrations LNK603DG AC DC Converters applications.
- DVD players
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Tablets
- AC-DC Output Power Conversion Applications
- Automotive Clusters
- Adapters for Handheld Electronics
- Standby power supplies for TV
- Battery chargers for mobile devices with touchpad display
- Air conditioners
- Lighting controls