LNK603PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power Rating | 3.3W |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Current | 320mA |
| Power Dissipation | 2.5W |
| Output Current | 214mA |
| Output Power | 3.3W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | Up to 85kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK603PG Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs ANALOG CIRCUIT analog IC type.As soon as the switching frequency reaches Up to 85kHz , the circuit is closed.There have been 8 terminations of this program.Approximately 8 pins are present on the ac/dc converter.The pins of the ac-dc converter total to 8 .Through Hole are the recommended mounting method for the ac dc converters.A member of the LinkSwitch?-II manufacturer family, it has the following characteristics.In this AC to DC transformer, there are 1 outputs to run.Current output is set to 214mA .In this AC to DC transformer, the output voltage is 6V .When operating at a frequency of 66kHz , AC to DC converter is capable of reaching high efficiency.You are able to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.Coverters generate 3.3W in terms of output power.An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.A minimum voltage supply across the converter is 85V .The maximum supply voltage across the converter is 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK603PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 214mA
LNK603PG Applications
There are a lot of Power Integrations LNK603PG AC DC Converters applications.
- Automotive Clusters
- Adapter/Charger for Cordless Phones
- Charger
- AC?DC USB chargers for Cameras
- Battery chargers for smart phones
- Rice Cooker
- Auxiliary Power Supplies
- Appliances
- Smartphones
- Z-Wave
