LNK604DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power Rating | 4.1W |
| Max Power Dissipation | 4.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 66kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Power Dissipation | 3.5W |
| Output Current | 600mA |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | Up to 85kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Duty Cycle | 55% |
| Output Isolation | Isolated |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK604DG Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width), 7 Leads package.It is available in Tube AC/DC power converter.This AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.At this point, the switching frequency reaches Up to 85kHz .As a result, it has a total of 8 terminations.There are 8 pins on the ac/dc converter.The pins of the ac-dc converter count up to 8 .The ac dc converters are suitable for mounting by Surface Mount .A member of the LinkSwitch?-II manufacturer family, it has the following characteristics.There are 1 outputs to run.In this AC to DC transformer, the output current is set to 600mA .As a result, its output voltage is 700V .A high efficiency can be achieved by operating at a frequency of 66kHz .It is possible to read the REACH SVHC standard at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.AC to DC power converters should be able to accept input voltages (AC) below 265V .
LNK604DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 600mA
LNK604DG Applications
There are a lot of Power Integrations LNK604DG AC DC Converters applications.
- Battery chargers for mobile devices with touchpad display
- LED Driver
- AC--DC Adapter
- Linear Adapter Replacements
- Power tools
- IoT Applications
- Battery chargers for smart phones
- Standby and Auxiliary Power Supplies
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Portable audio
