banner_page

LNK605DG

8 Terminations8 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK605DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 180
  • Description: 8 Terminations8 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Min Input Voltage 85V
Frequency - Switching Up to 85kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 55 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Voltage - Breakdown 700V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Height 1.65mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2010
Series LinkSwitch®-II
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Terminal Finish MATTE TIN
Power Rating 5.1W
Max Power Dissipation 5.1W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Frequency 66kHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
Number of Outputs 1
Output Voltage 5V
Analog IC - Other Type ANALOG CIRCUIT
Nominal Supply Current 480μA
Output Current 555mA
Output Power 5.1W
Topology Flyback

LNK605DG Overview


8-SOIC (0.154, 3.90mm Width), 7 Leads is the package in which the ac to dc converter is embedded.It is available in Tube AC/DC power converter.A AC/DC converter of this type is mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.As soon as the switching frequency reaches Up to 85kHz , the circuit is closed.In total, there are 8 terminations.There are 8 pins on this ac/dc converter.The pins of the ac-dc converter count up to 8 .Suitable mounting is provided by Surface Mount .A member of the LinkSwitch?-II manufacturer family, it has the following characteristics.A total of 1 outputs are to be processed.It has been set to 555mA for the output current.The output voltage of the AC/DC converter is 5V .A high efficiency can be achieved by operating at a frequency of 66kHz .REACH SVHC standard can be found at No SVHC .Input voltage for the AC to DC converter is available under 265V .The output power of a coverter is assumed to be 5.1W .The AC to DC inverter can be used with an input voltage of less than 85V V.A minimum voltage of 85V is required across the converter.265V is the maximum supply voltage across the converter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .

LNK605DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 555mA

LNK605DG Applications


There are a lot of Power Integrations LNK605DG AC DC Converters applications.

  • AC/DC LED Driver applications
  • AC/DC Adaptors/Chargers for E-books
  • Switching AC-DC Charger
  • Low power ac?dc Adapters for Chargers
  • Small off-line low voltage power supplies
  • Standby power supplies for TV
  • Standby Power for General Off-Line Applications
  • USB-PD 2.0
  • Vacuum Cleaner
  • Replaces linear transformers

Write a review

Note: HTML is not translated!
    Bad           Good