LNK606DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power Rating | 6.1W |
| Max Power Dissipation | 6.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 520μA |
| Output Power | 5.5W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | Up to 85kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK606DG Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.When the switching frequency reaches Up to 85kHz , the process is complete.In total, it has 8 terminations.A ac/dc converter with 7 pins is available.In this ac-dc converter, there are 8 pins.It belongs to a manufacturer family of LinkSwitch?-II .There are 1 outputs to run.You may read the REACH SVHC standard at No SVHC .An input voltage of 265V is available for powering the AC to DC converter.5.5W is the output power of a coverter.An input voltage of less than 85V V is required to operate the AC to DC inverter.In order for the converter to function properly, the supply voltage must be at least 85V .There is a maximum voltage supply across the converter of 265V volts.It is recommended to keep the voltage (AC) that can be applied to the AC to DC power converter below 265V .
LNK606DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
LNK606DG Applications
There are a lot of Power Integrations LNK606DG AC DC Converters applications.
- Standby power
- Appliances
- Adapter/Charger for Cordless Phones
- Laptops and personal digital assistants
- Portable Apparatus
- Z-Wave
- Battery Chargers
- Remotely-controlled appliances
- WiFi Wireless
- AC?DC USB chargers for Cameras
