Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Surface Mount |
Package / Case |
8-SMD (7 Leads), Gull Wing |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2008 |
Series |
LinkSwitch®-II |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
4 (72 Hours) |
Number of Terminations |
8 |
Termination |
SMD/SMT |
Terminal Finish |
MATTE TIN |
Power (Watts) |
6.1W |
Max Power Dissipation |
6.1W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
250 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Frequency |
66kHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Pin Count |
8 |
Number of Outputs |
1 |
Output Voltage |
700V |
Max Output Current |
438mA |
Max Supply Voltage |
265V |
Min Supply Voltage |
85V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
520μA |
Power Dissipation |
5.5W |
Output Current |
980mA |
Output Power |
5.5W |
Max Output Voltage |
700V |
Topology |
Flyback |
Frequency - Switching |
Up to 85kHz |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
55 % |
Max Supply Voltage (AC) |
265V |
Output Isolation |
Isolated |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
6.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK606GG Overview
A ac to dc converter of the package 8-SMD (7 Leads), Gull Wing contains the ac to dc converter.The AC/DC power converter is available in Tube .The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.Up to 85kHz is the switching frequency.There have been 8 terminations of this program.The ac/dc converter has a total of 8 pins.There are a total of 8 pins on the ac-dc converter.The AC to DC converter belongs to the manufacturer family of LinkSwitch?-II .There are 1 outputs to be processed.Currently, the output current is set to 980mA .Its output voltage is700V .AC to DC converter reaches high efficiency when operated at a frequency of 66kHz .You can read the standard of REACH SVHC : No SVHC .Input voltages under 265V can be used to power the AC to DC converter.Coverters generate 5.5W in terms of output power.Supply voltage across the converter must be 85V at all times.A maximum voltage of 265V can be applied across the converter.The AC to DC power supply can operate with a minimum supply voltage of 85V volts.
LNK606GG Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 980mA
LNK606GG Applications
There are a lot of Power Integrations LNK606GG AC DC Converters applications.
- Switching AC-DC Adapter
- Wall switches
- MP3
- Standby power supplies for VCR
- Dimmers
- Off--line Battery Charger
- Air conditioners
- Standby power supplies for TV
- Consumer electronics
- Standby power supplies for IR