LNK613DG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Terminal Finish | MATTE TIN |
| Power Rating | 3.3W |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Max Output Current | 214mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 440μA |
| Power Dissipation | 2.5W |
| Output Current | 555mA |
| Output Power | 3.3W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 1.65mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK613DG Overview
In the package 8-SOIC (0.154, 3.90mm Width), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.Surface Mount mounts this AC/DC converter.The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.At this point, the switching frequency reaches Up to 85kHz .A total of 8 terminations have been recorded.In this ac/dc converter, there are 7 pins.The pins of the ac-dc converter total to 8 .It are possible to mount thare ac dc converters by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-II family of manufacturers.AC to DC converter is necessary to run 1 outputs.Currently, the output current is set to 555mA .It produces a voltage of 5V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 65kHz .You can read the standard of REACH SVHC : No SVHC .Coverters generate 3.3W in terms of output power.A minimum voltage supply across the converter is 85V .This converter can operate at a maximum supply voltage of 265V .A AC to DC power converter's input voltage (AC) should not exceed 265V .
LNK613DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 555mA
LNK613DG Applications
There are a lot of Power Integrations LNK613DG AC DC Converters applications.
- Wireless System
- USB type-c v1.2 chargers with optional VDM
- AC/DC Adaptors/Chargers for Cell Phones
- White goods
- Low power ac?dc Adapters for Chargers
- Automotive Infotainment
- Standby power supplies for TV
- Portable Apparatus
- Adapter/Charger for Cell
- Small off-line low voltage power supplies
