LNK613DG-TL
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Voltage | 700V |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Current | 320mA |
| Output Power | 3.3W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
LNK613DG-TL Overview
In the 8-SOIC (0.154, 3.90mm Width), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter type is Tape & Reel (TR) .It is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.When the switching frequency reaches Up to 85kHz , the process is complete.Total terminations are 8 .Approximately 7 pins are present on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .It belongs to a manufacturer family of LinkSwitch?-II .It has been set to 320mA for the output current.There is 700V output voltage from this AC/DC converter.A coverter produces 3.3W watts of output power.The AC to DC power supply can function with a minimum supply voltage of -300mV volts.
LNK613DG-TL Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 320mA
LNK613DG-TL Applications
There are a lot of Power Integrations LNK613DG-TL AC DC Converters applications.
- LED lights
- Digital cameras
- ATX/BTX Auxiliary Power
- AC?DC USB chargers for Cameras
- Auxiliary Power Supplies
- USB type-c v1.2 chargers with optional VDM
- Battery chargers for media tablets
- Chargers for cell/cordless phones
- Cellular phone chargers
- Air Conditioning
