LNK613PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| Terminal Finish | MATTE TIN |
| Power Rating | 3.3W |
| Max Power Dissipation | 3.3W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 214mA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Power Dissipation | 2.5W |
| Output Current | 320mA |
| Output Power | 3.3W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK613PG Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .This AC DC converter employs ANALOG CIRCUIT analog IC type.There is Up to 85kHz switching frequency.There are a total of 8 terminations.On the ac/dc converter, there are 8 pins.A total of 8 pins are present on the ac-dc converter.It are possible to mount thare ac dc converters by Through Hole .It belongs to the family of LinkSwitch?-II manufacturers.The number of outputs to run is 1 .There is 320mA output current set.The voltage output by this AC/DC converter is 700V .High efficiency can be achieved when AC to DC converters frequency is set to 65kHz .Here is the standard for REACH SVHC : No SVHC .It is assumed that a coverter generates 3.3W as its output power.A minimum voltage of 85V is required across the converter.It is possible to supply 265V voltage across the converter.A AC to DC power converter's input voltage (AC) should not exceed 265V .If the supply voltage is set to -300mV , then it can operate.
LNK613PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 320mA
LNK613PG Applications
There are a lot of Power Integrations LNK613PG AC DC Converters applications.
- Off--line Battery Charger
- Shaver Charger
- Humidifier
- Adapters for Handheld Electronics
- Utility meters
- Dimmers
- Wireless System
- Standby power supplies for IR
- Set-top boxes
- Universal input AC/DC adapters (15W - 45W)
