banner_page

LNK614PG

8 Terminations8 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz Min 85V VMax 265V V


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK614PG
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 332
  • Description: 8 Terminations8 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz Min 85V VMax 265V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2008
Series LinkSwitch®-II
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Termination Through Hole
Terminal Finish MATTE TIN
Max Power Dissipation 4.1W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Frequency 65kHz
Pin Count 8
Number of Outputs 1
Output Voltage 700V
Max Output Current 267mA
Max Supply Voltage 9V
Min Supply Voltage -300mV
Analog IC - Other Type ANALOG CIRCUIT
Operating Supply Current 440μA
Power Dissipation 3.5W
Output Current 400mA
Output Power 4.1W
Max Output Voltage 700V
Topology Flyback
Frequency - Switching Up to 85kHz
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Max Duty Cycle 55 %
Max Supply Voltage (AC) 265V
Output Isolation Isolated
Max Input Voltage (AC) 265V
Min Supply Voltage (AC) 85V
Length 9.56mm
Width 7.62mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LNK614PG Overview


8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .Switching frequency reaches Up to 85kHz Hz.It has a total of 8 terminations.On this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.It belongs to the family of LinkSwitch?-II manufacturers.In this AC to DC transformer, there are 1 outputs to run.It has been set to 400mA for the output current.The voltage output by this AC/DC converter is 700V .High efficiency can be achieved when AC to DC converters frequency is set to 65kHz .Here is the standard for REACH SVHC : No SVHC .The output power of a coverter is assumed to be 4.1W .A minimum voltage supply across the converter is 85V .The maximum supply voltage across the converter is 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .It is capable of working with a minimum supply voltage of -300mV volts.

LNK614PG Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 400mA

LNK614PG Applications


There are a lot of Power Integrations LNK614PG AC DC Converters applications.

  • ZigBee
  • Universal Off-Line Power Supplies
  • AC-DC Output Power Conversion Applications
  • MPS parts
  • Adapter/Charger for Cordless Phones
  • Replacements for bulky plug-in transformers
  • Automotive Infotainment
  • Laptops and personal digital assistants
  • Appliances
  • MP3

Write a review

Note: HTML is not translated!
    Bad           Good