banner_page

LNK615DG

8 Terminations7 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz


  • Manufacturer: Power Integrations
  • Nocochips NO: 633-LNK615DG
  • Package: 8-SOIC (0.154, 3.90mm Width), 7 Leads
  • Datasheet: PDF
  • Stock: 400
  • Description: 8 Terminations7 Pin AC to DC power converterLinkSwitch?-II Series 1 OutputsUp to 85kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width), 7 Leads
Number of Pins 7
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2002
Series LinkSwitch®-II
JESD-609 Code e3
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish MATTE TIN
Power Rating 5.1W
Max Power Dissipation 5.1W
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Frequency 65kHz
Time@Peak Reflow Temperature-Max (s) 40
Pin Count 8
JESD-30 Code R-PDSO-G8
Number of Outputs 1
Output Voltage 700V
Analog IC - Other Type SWITCHING REGULATOR
Power Dissipation 4.5W
Output Current 750mA
Topology Flyback
Min Input Voltage 85V
Frequency - Switching Up to 85kHz
Max Input Voltage 265V
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Temperature, Short Circuit
Duty Cycle 55%
Output Isolation Isolated
Height 1.65mm
Length 4.9mm
Width 3.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LNK615DG Overview


This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .There is a AC/DC power converter of Tube available.Surface Mount is mounted in the way of this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING REGULATOR is employed.Up to 85kHz is the switching frequency.A total of 8 terminations have been recorded.It contains 7 pins.The pins of the ac-dc converter total to 8 .The ac dc converters is suitable for mounting by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-II family of manufacturers.A total of 1 outputs need to be run.750mA is set as the output current.Its output voltage amounts to 700V .AC to DC converter is able to reach high efficiency when its frequency is 65kHz .You may read the REACH SVHC standard at No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .If the input voltage is less than 85V V, the AC to DC inverter can be used.

LNK615DG Features


Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 750mA

LNK615DG Applications


There are a lot of Power Integrations LNK615DG AC DC Converters applications.

  • Adaptors for Portable Media Player
  • PDAs
  • Open Frame Switching Power Supply
  • Appliances
  • MP3
  • Battery Chargers
  • Power Adaptors
  • Automotive Clusters
  • Z-Wave
  • Small off-line low voltage power supplies

Write a review

Note: HTML is not translated!
    Bad           Good