LNK615PG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Power Rating | 5.1W |
| Max Power Dissipation | 5.1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 337mA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 480μA |
| Power Dissipation | 4.5W |
| Output Current | 504mA |
| Output Power | 5.1W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK615PG Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.Through Hole mounts this AC/DC converter.This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.At this point, the switching frequency reaches Up to 85kHz .There are a total of 8 terminations in it.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter count up to 8 .It are possible to mount thare ac dc converters by Through Hole .The AC to DC converter belongs to the manufacturer family of LinkSwitch?-II .Running 1 outputs is available.Current output is set to 504mA .There is 700V output voltage from this AC/DC converter.The power AC DC is capable of high efficiency when operated at a frequency of 65kHz .It is possible to read the REACH SVHC standard at: No SVHC .A coverter produces 5.1W watts of output power.Supply voltage across the converter must be 85V at all times.Across the converter, a maximum supply voltage of 265V may be applied.An input voltage (AC) should be applied under 265V to the AC to DC power converter.The AC to DC power supply is capable of operating with a minimum supply voltage of -300mV volts.
LNK615PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 504mA
LNK615PG Applications
There are a lot of Power Integrations LNK615PG AC DC Converters applications.
- Laptops
- Low-Voltage I/O System Power
- Vacuum Cleaner
- AC?DC USB chargers for Cameras
- Air conditioners
- ZigBee
- Battery Chargers
- PDAs
- AC/DC LED Driver applications
- Universal Off-Line Power Supplies
