LNK616GG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| Terminal Finish | MATTE TIN |
| Power Rating | 6.1W |
| Max Power Dissipation | 6.1W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Max Output Current | 438mA |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Nominal Supply Current | 520μA |
| Power Dissipation | 5.5W |
| Output Current | 555mA |
| Output Power | 6.1W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK616GG Overview
It is embedded in package 8-SMD (7 Leads), Gull Wing .The ac dc converter is available in Tube case.Surface Mount is mounted in the way of this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.Switching frequency reaches Up to 85kHz Hz.It has a total of 8 terminations.On the ac/dc converter, there are 8 pins.There are a total of 8 pins on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .The product is acdc converter of the LinkSwitch?-II manufacturer family.There are 1 outputs to be processed.AC to DC converter is set to 555mA for the output current.In this AC to DC transformer, the output voltage is 5V .When operating at a frequency of 65kHz , AC to DC converter is capable of reaching high efficiency.It is possible to read the REACH SVHC standard at: No SVHC .The output power of a coverter generates 6.1W .In order for the converter to function properly, the supply voltage must be at least 85V .Across the converter, a maximum supply voltage of 265V may be applied.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK616GG Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 555mA
LNK616GG Applications
There are a lot of Power Integrations LNK616GG AC DC Converters applications.
- Portable Apparatus
- Power tools fast chargers with trickle and on/off
- Power adapters for monitors
- Smartphones
- Power tools
- ZigBee
- Air Conditioning
- AC?DC USB chargers for Cell Phones
- 3.3V power supplies
- Power Adaptors
