LNK623DG
| Parameters | |
|---|---|
| Length | 4.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2002 |
| Series | LinkSwitch®-CV |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 9W |
| Max Power Dissipation | 9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 230V |
| Terminal Pitch | 1.27mm |
| Frequency | 100kHz |
| Pin Count | 8/7 |
| JESD-30 Code | R-PDSO-G7 |
| Number of Outputs | 3 |
| Output Voltage | 700V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Power Dissipation | 5W |
| Output Current | 600mA |
| Output Power | 6W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 54 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 54% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 1.75mm |
LNK623DG Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.There have been 7 terminations of this program.A ac/dc converter with 8 pins is available.There are 8/7 pins on the ac-dc converter.This AC to DC converter belongs to the LinkSwitch?-CV family of manufacturers.A total of 3 outputs are available for processing.600mA is set as the output current.There is 700V output voltage from this AC/DC converter.A high efficiency can be achieved by operating at a frequency of 100kHz .It is possible to read the REACH SVHC standard at: No SVHC .Input voltages under 265V can be used to power the AC to DC converter.In the AC to DC transformer of a coverter, the output power is 6W .It is possible to operate the AC to DC inverter with an input voltage that is less than 85V V.Supply voltage across the converter must be 85V at all times.There is a maximum voltage supply across the converter of 265V volts.At all times, this AC to DC converter should be set to 230V .A AC to DC power converter's input voltage (AC) should not exceed 265V .
LNK623DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
With 8 pins
Output Current at 600mA
LNK623DG Applications
There are a lot of Power Integrations LNK623DG AC DC Converters applications.
- Auxiliary Power Supply
- Automotive Telematics
- Adapter/Charger for Cell
- Air Conditioning
- Cellular phone chargers
- Battery Chargers
- AC-DC Output Power Conversion Applications
- Power adapters for monitors
- AC?DC USB chargers for Tablets
- Power adapters for network devices
