Parameters |
Factory Lead Time |
1 Week |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2002 |
Series |
LinkSwitch®-CV |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
7 |
Terminal Finish |
Matte Tin (Sn) |
Power Rating |
9W |
Max Power Dissipation |
9W |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
230V |
Frequency |
100kHz |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T7 |
Number of Outputs |
3 |
Output Voltage |
700V |
Analog IC - Other Type |
ANALOG CIRCUIT |
Operating Supply Current |
440μA |
Power Dissipation |
5W |
Output Current |
600mA |
Output Power |
6W |
Topology |
Flyback |
Min Input Voltage |
85V |
Max Input Voltage |
265V |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Temperature, Short Circuit |
Max Duty Cycle |
54 % |
Max Supply Voltage (AC) |
265V |
Duty Cycle |
54% |
Output Isolation |
Isolated |
Voltage - Breakdown |
725V |
Min Input Voltage (AC) |
85V |
Max Input Voltage (AC) |
265V |
Min Supply Voltage (AC) |
85V |
Length |
9.575mm |
Width |
7.62mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
RoHS Compliant |
LNK623PG Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.There are a total of 7 terminations.A ac/dc converter with 8 pins is available.In this ac-dc converter, there are 8 pins.A member of the LinkSwitch?-CV manufacturer family, it has the following characteristics.A total of 3 outputs are available for processing.Current output is set to 600mA .Its output voltage amounts to 700V .This power AC DC is capable of reaching high efficiency when operating at a frequency of 100kHz .You can read the standard of REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 265V .The output power of a coverter is assumed to be 6W .It is possible to use the AC to DC inverter with an input voltage less than 85V V.This converter requires a minimum supply voltage of 85V volts.Across the converter, the maximum supply voltage is 265V .Always keep this AC to DC converter set to 230V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
LNK623PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 600mA
LNK623PG Applications
There are a lot of Power Integrations LNK623PG AC DC Converters applications.
- Set -Top Box (STB) Power Supply
- Networking
- Dimmers
- Smartphones
- IoT Applications
- Remotely-controlled appliances
- Portable Apparatus
- SMPS house keeping power supplies
- Shaver Charger
- Cleaners